Assignment D6

Talk about your designs, ask questions about your assignments, and get advice from your peers.
ArelyC
Posts: 4
Joined: September 27th, 2021, 6:36 pm

Assignment D6

Unread post by ArelyC »

Hello,
Can anyone let me know if I am supposed to add measurements to the rough sketch of the elevation drawing? The examples on the assignment and textbook do not show any numbers. :?

Thank you!
Arely
MarianB
Posts: 2
Joined: April 1st, 2021, 10:44 pm

Re: Assignment D6

Unread post by MarianB »

Hello! Yes, you do have to add measurements to the rough sketch, but when you do the floorplan, just put the scale you're using on a corner. Hope this helps.
ArelyC
Posts: 4
Joined: September 27th, 2021, 6:36 pm

Re: Assignment D6

Unread post by ArelyC »

Thank you MarianB! :D
KylieMadison
Posts: 1
Joined: August 15th, 2022, 9:47 pm

Assignment D6

Unread post by KylieMadison »

this is my first time using the forum, I'm not exactly sure if I'm doing it right. I was a little confused with what to do because D6 sounds like its asking me to do the exact same thing I did in D4 and D5 with the exact same room. any info helps thanks!
ChristaEscobar
Posts: 3
Joined: October 19th, 2020, 3:29 pm

Re: Assignment D6

Unread post by ChristaEscobar »

Hi, D4 is a rough sketch of a room in your house. D5 is making a floorplan based on a rough sketch in the assignment template. D6 is making a floorplan based on the sketch you made from your house in assignment D4. Hope this helps!!
Post Reply